Four new species of Dothideomycetes (Ascomycota) from Pará Rubber (Heveabrasiliensis) in Yunnan Province, China.

The tropical areas in southern and south-western Yunnan are rich in fungal diversity. Additionally, the diversity of seed flora in Yunnan Province is higher than in other regions in China and the abundant endemic species of woody plants provide favourable substrates for fungi. Rubber plantations in Yunnan Province are distributed over a large area, especially in Xishuangbanna. During a survey of rubber-associated fungi in Yunnan Province, China, dead rubber branches with fungal fruiting bodies were collected. Morphological characteristics and multigene phylogenetic analyses (ITS, LSU, SSU, rpb2 and tef1-α) revealed four distinct new species, described herein as Melomastiapuerensis, Nigrogranalincangensis, Pseudochaetosphaeronemalincangensis and Pseudochaetosphaeronemaxishuangbannaensis. Detailed descriptions, illustrations and phylogenetic trees are provided to show the taxonomic placements of these new species.

Improving furfural tolerance in a xylose-fermenting yeast Spathaspora passalidarum CMUWF1-2 via adaptive laboratory evolution.

BACKGROUND: Spathaspora passalidarum is a yeast with the highly effective capability of fermenting several monosaccharides in lignocellulosic hydrolysates, especially xylose. However, this yeast was shown to be sensitive to furfural released during pretreatment and hydrolysis processes of lignocellulose biomass. We aimed to improve furfural tolerance in a previously isolated S. passalidarum CMUWF1-2, which presented thermotolerance and no detectable glucose repression, via adaptive laboratory evolution (ALE). RESULTS: An adapted strain, AF2.5, was obtained from 17 sequential transfers of CMUWF1-2 in YPD broth with gradually increasing furfural concentration. Strain AF2.5 could tolerate higher concentrations of furfural, ethanol and 5-hydroxymethyl furfuraldehyde (HMF) compared with CMUWF1-2 while maintaining the ability to utilize glucose and other sugars simultaneously. Notably, the lag phase of AF2.5 was 2 times shorter than that of CMUWF1-2 in the presence of 2.0 g/l furfural, which allowed the highest ethanol titers to be reached in a shorter period. To investigate more in-depth effects of furfural, intracellular reactive oxygen species (ROS) accumulation was observed and, in the presence of 2.0 g/l furfural, AF2.5 exhibited 3.41 times less ROS accumulation than CMUWF1-2 consistent with the result from nuclear chromatins diffusion, which the cells number of AF2.5 with diffuse chromatins was also 1.41 and 1.24 times less than CMUWF1-2 at 24 and 36 h, respectively. CONCLUSIONS: An enhanced furfural tolerant strain of S. passalidarum was achieved via ALE techniques, which shows faster and higher ethanol productivity than that of the wild type. Not only furfural tolerance but also ethanol and HMF tolerances were improved.

Sustainable Innovation: Fabrication and Characterization of Mycelium-Based Green Composites for Modern Interior Materials Using Agro-Industrial Wastes and Different Species of Fungi.

Mycelium-based bio-composites (MBCs) represent a sustainable and innovative material with high potential for contemporary applications, particularly in the field of modern interior design. This research investigates the fabrication of MBCs for modern interior materials using agro-industrial wastes (bamboo sawdust and corn pericarp) and different fungal species. The study focuses on determining physical properties, including moisture content, shrinkage, density, water absorption, volumetric swelling, thermal degradation, and mechanical properties (bending, compression, impact, and tensile strength). The results indicate variations in moisture content and shrinkage based on fungal species and substrate types, with bamboo sawdust exhibiting lower shrinkage. The obtained density values range from 212.31 to 282.09 kg/m3, comparable to traditional materials, suggesting MBCs potential in diverse fields, especially as modern interior elements. Water absorption and volumetric swelling demonstrate the influence of substrate and fungal species, although they do not significantly impact the characteristics of interior decoration materials. Thermal degradation analysis aligns with established patterns, showcasing the suitability of MBCs for various applications. Scanning electron microscope observations reveal the morphological features of MBCs, emphasizing the role of fungal mycelia in binding substrate particles. Mechanical properties exhibit variations in bending, compression, impact, and tensile strength, with MBCs demonstrating compatibility with traditional materials used in interior elements. Those produced from L. sajor-caju and G. fornicatum show especially promising characteristics in this context. Particularly noteworthy are their superior compression and impact strength, surpassing values observed in certain synthetic foams multiple times. Moreover, this study reveals the biodegradability of MBCs, reaching standards for environmentally friendly materials. A comprehensive comparison with traditional materials further supports the potential of MBCs in sustainable material. Challenges in standardization, production scalability, and market adoption are identified, emphasizing the need for ongoing research, material engineering advancements, and biotechnological innovations. These efforts aim to enhance MBC properties, promoting sustainability in modern interior applications, while also facilitating their expansion into mass production within the innovative construction materials market.

A New Edible Wild Mushroom Species, Panus sribuabanensis (Panaceae, Polyporales) from Northern Thailand and Its Nutritional Composition, Total Phenolic Content, and Antioxidant Activity.

A new edible wild mushroom species, described herein as Panus sribuabanensis, was collected from local markets and natural forests located in northern Thailand. This species is characterized by its medium to large-sized basidiomata, broadly ellipsoid to ellipsoid-shaped basidiospores, dimitic hyphal system, and the absence of hyphal pegs. A molecular phylogenetic analysis of combined the internal transcribed spacer (ITS) and large subunit (nrLSU) of nuclear ribosomal DNA sequences supported the monophyly of P. sribuabanensis as a distinct lineage within the genus Panus. Full description, illustrations, color photographs, and a phylogenetic tree to show the placement of P. sribuabanensis are provided. The dried mushroom showed a nutritional composition within the range of 2.58%-2.67% for fat content, 27.10%-27.98% for protein, and 43.97%-44.10% for carbohydrates. The ethanolic extracts from this mushroom exhibited a total phenolic content ranging from 0.66 to 0.74 mg GAE/g dry weight (dw). Moreover, the antioxidant activities of ethanolic extracts evaluated by the 2,2-diphenyl-1-picrylhydrazyl (0.90-1.08 mg TE/g dw) and ferric reducing antioxidant power (0.93-1.08 mg TE/g dw) assays demonstrate higher activity compared to the 2,2-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid) assay (0.44-0.51 mg TE/g dw). The outcomes of this study provide significant information on the nutritional value, phenolic content, and antioxidant activity potential of this new mushroom species discovered in northern Thailand.

Recent progress in the characterization and application of exo-electrogenic microorganisms.

Exo-electrogenic microorganisms are characterized by their special metabolic capability of transferring metabolic electrons out of their cell, into insoluble external electron acceptors such as iron or manganese oxides and electrodes, or vice versa take up electron from electrodes. Their conventional application is primarily limited to microbial fuel cells for electrical power generation and microbial electrolysis cells for the production of value-added products such as biohydrogen, biomethane and hydrogen peroxide. The utility of exo-electrogenic organisms has expanded into many other applications in recent times. Such examples include microbial desalination cells, microbial electro-synthesis cells producing value-added chemicals such as bio-butanol and their applications in other carbon sequestration technologies. Additionally, electrochemically-active organisms are now beginning to be employed in biosensor applications for environmental monitoring. Additionally, the utility of biocathodes in bio-electrochemical systems is also a novel application in catalyzing the cathodic oxygen reduction reaction to enhance their electrochemical performance. Advances have also been made in the expansion and use of other organisms such as the usage of photosynthetic microorganisms for the fabrication of self-sustained bio-electrochemical systems. This review attempts to provide a comprehensive picture of the state-of the art of exo-electrogenic organisms and their novel utility in bioelectrochemical systems.

Multifarious Characterization and Efficacy of Three Phosphate-Solubilizing Aspergillus Species as Biostimulants in Improving Root Induction of Cassava and Sugarcane Stem Cuttings.

Several soil fungi significantly contribute to the enhancement of plant development by improving nutrient uptake and producing growth-promoting metabolites. In the present study, three strains of phosphate-solubilizing fungi, namely, Aspergillus chiangmaiensis SDBR-CMUI4, A. pseudopiperis SDBR-CMUI1, and A. pseudotubingensis SDBR-CMUO2, were examined for their plant-growth-promoting capabilities. The findings demonstrated that all fungi showed positive siderophore production, but only A. pseudopiperis can produce indole-3-acetic acid. All fungi were able to solubilize insoluble phosphate minerals [Ca3(PO4)2 and FePO4] by producing phosphatase enzymes and organic acids (oxalic, tartaric, and succinic acids). These three fungal species were grown at a water activity ranging from 0.837 to 0.998, pH values ranging from 4 to 9, temperatures between 4 and 40 °C, and 16-17% NaCl in order to evaluate their drought, pH, temperature, and salt tolerances, respectively. Moreover, the results indicated that A. pseudopiperis and A. pseudotubingensis were able to tolerate commercial insecticides (methomyl and propargite) at the recommended dosages for field application. The viability of each fungal strain in the inoculum was higher than 50% at 4 and 20 °C after 3 months of storage. Subsequently, all fungi were characterized as plant-growth-promoting strains by improving the root inductions of cassava (Manihot esculenta Crantz) and sugarcane (Saccharum officinarum L.) stem cuttings in greenhouse experiments. No symptoms of plant disease were observed with any of the treatments involving fungal inoculation and control. The cassava and sugarcane stem cuttings inoculated with fungal strains and supplemented with Ca3(PO4)2 exhibited significantly increased root lengths, shoot and root dry biomasses, chlorophyll concentrations, and cellular inorganic phosphate contents. Therefore, the application of these phosphate-solubilizing fungi is regarded as a new frontier in the induction of roots and the promotion of growth in plants.

Value-added green biorefinery co-products from ultrasonically assisted DES-pretreated Chlorella biomass.

This study pursued the goal of creating value-added co-products through an environmentally friendly biorefinery approach, employing ultrasonically assisted deep eutectic solvent (DES)-pretreated Chlorella biomass. The primary focus was on generating enriched biodiesel feedstock with exceptional fuel properties and developing hydroponic biofertilizer. The results demonstrated the effectiveness of a two-step process involving a 5-minute ultrasound-assisted DES pretreatment followed by ultrasound-assisted solvent extraction, which efficiently extracted lipids from Chlorella biomass, yielding biodiesel-quality lipids with good cetane number (59.42) and high heating value (40.11 MJ/kg). Notably, this two-step approach (78.04 mg-lipid/g-microalgal biomass) led to a significant 2.10-fold increase in lipid extraction compared to a one-step process (37.15 mg-lipid/g-microalgal biomass) that combined ultrasound-assisted DES pretreatment and solvent extraction. Importantly, the aqueous extract derived from lipid-extracted microalgal biomass residues (LMBRs) showed promise as a component in hydroponic biofertilizer production, supporting lettuce growth in hydroponic deep water culture system. Consequently, microalgae biorefinery co-products hold tremendous potential in enhancing the profitability and sustainability of interconnected sectors, encompassing renewable energy, agriculture, and the environment.

Exploring diversity rock-inhabiting fungi from northern Thailand: a new genus and three new species belonged to the family Herpotrichiellaceae.

Members of the family Herpotrichiellaceae are distributed worldwide and can be found in various habitats including on insects, plants, rocks, and in the soil. They are also known to be opportunistic human pathogens. In this study, 12 strains of rock-inhabiting fungi that belong to Herpotrichiellaceae were isolated from rock samples collected from forests located in Lamphun and Sukhothai provinces of northern Thailand during the period from 2021 to 2022. On the basis of the morphological characteristics, growth temperature, and multi-gene phylogenetic analyses of a combination of the internal transcribed spacer, the large subunit, and the small subunit of ribosomal RNA, beta tubulin and the translation elongation factor 1-a genes, the new genus, Petriomyces gen. nov., has been established to accommodate the single species, Pe. obovoidisporus sp. nov. In addition, three new species of Cladophialophora have also been introduced, namely, Cl. rupestricola, Cl. sribuabanensis, and Cl. thailandensis. Descriptions, illustrations, and a phylogenetic trees indicating the placement of these new taxa are provided. Here, we provide updates and discussions on the phylogenetic placement of other fungal genera within Herpotrichiellaceae.

First Report of Anthracnose on Giant Philodendron Caused by Colletotrichum siamense in Thailand.

Giant philodendron (Philodendron giganteum Schott) is cultivated in Thailand and has become an important ornamental houseplant with great economic value. During the rainy season in July 2022, anthracnose disease on this plant was observed at a nursery in Saraphi District, Chiang Mai Province (18°40'18" N, 99°03'17" E), Thailand. The area investigated was approximately 800 m². The disease incidence was estimated at above 15% according to the total number of plants (220 plants). The disease severity of each plant was between 25 and 50% of the necrotic lesion on the leaf. Initially, symptoms with brown spots, appeared on leaves, gradually becoming enlarged, elongate, 1 to 11 cm long by 0.3 to 3.5 cm wide, irregular, sunken, dark brown, with a yellow halo surrounding each lesion. Then, the diseased leaves eventually withered and died. Leaf pieces (5 × 5 mm2) of the margins between lesions and the healthy tissue were surface sterilized in 1% NaClO for 1 min, 70% ethanol for 30 s, and rinsed three times with sterile distilled water. Tissues were placed on potato dextrose agar (PDA) and incubated at 25°C in darkness. After three days of incubation, pure fungal colonies were purified by a single hyphal tip method on PDA (Korhonen and Hintikka 1980). Two fungal isolates (SDBR-CMU471 and SDBR-CMU472) with similar morphology were obtained. Fungal colonies on PDA were white and 38 to 40 mm in diameter after 3 days of incubation at 25 °C, then grayish white with cottony mycelia, the reverse side pale yellow after one week of incubation. Both isolates produced asexual structures on PDA. Setae were brown with 1 to 3 septa, 50 to 110 × 2.4 to 4.0 µm, with a cylindrical base, and acuminate tip. Conidiophores were hyaline to pale brown, septate, and branched. Conidiogenous cells were hyaline to pale brown, cylindrical to ampulliform, 9.5 to 35 µm long (n = 50). Conidia were single-celled, straight, hyaline, smooth-walled, cylindrical, ends rounded, guttulate, 9.1 to 19.6 × 3.5 to 5.6 µm (n = 50). Appressoria were brown to dark brown, oval to irregular, smooth-walled, 5 to 10 × 5 to 7.5 µm (n = 50). Morphologically, both fungal isolates resembled members of the Colletotrichum gloeosporioides species complex (Weir et al. 2012; Jayawardena et al. 2021). The internal transcribed spacer (ITS) region of the ribosomal DNA, actin (act), ß-tubulin (tub2), calmodulin (CAL), and glyceraldehyde-3-phosphate dehydrogenase (GAPDH) genes were amplified using primer pairs ITS5/ITS4 (White et al. 1990), ACT-512F/ACT-783R (Carbone and Kohn 1999), T1/T22 (O'Donnell and Cigelnik 1997), CL1C/CL2C (Weir et al. 2012), and GDF1/GDR1 (Templeton et al. 1992), respectively. Sequences were deposited in GenBank (ITS: OQ699280, OQ699281; act: OQ727122, OQ727123; tub2: OQ727124, OQ727125; CAL: OQ727126, OQ727127; GAPDH: OQ727128, OQ727129). Multi-gene (combined data set of ITS, GAPDH, CAL, act, and tub2) maximum likelihood phylogenetic analyses demonstrated that both isolates were identified as C. siamense with 100% support. In a pathogenicity test, leaves of healthy plants were surface sterilized with a 0.1% NaClO solution for 3 min, rinsed three times with sterile distilled water. After being air-dried, a uniform wound (5 pores, 3 mm in width) was made at the equator of each leaf using aseptic needles. Conidial suspensions were collected from two-week-old cultures and suspended in sterile distilled water with 0.05% Tween-20. Fifteen microliters of the conidial suspension (1 × 106 conidia/ml) were placed on wounded attached leaves. As well, wounded control leaves were mock inoculated with sterile distilled water. Ten replications were conducted for each treatment and experiments were repeated twice. The inoculated plants were stored in a greenhouse at conditions of 25 to 30°C and 75 to 85% relative humidity. After 14 days, all the inoculated leaves showed disease symptoms, brown lesions with yellow halos, whereas control leaves remained asymptomatic. The pathogen C. siamense was consistently re-isolated on PDA from the inoculated tissues to complete Koch's postulates. Colletotrichum siamense has been reported as a causal agent on a wide range of host plants in Thailand and throughout the world (Farr and Rossman 2021; Jayawardena et al. 2021). Prior to this study, C. endophytica, C. karsti, C. orchidearum, C. philodendricola, and C. pseudoboninense were identified as causal agents of anthracnose on philodendrons (Xue et al. 2020; Zhang et al. 2023). However, anthracnose caused by Colletotrichum species on giant philodendron (P. giganteum) has not been previously reported. Thus, we propose C. siamense as a new causal agent of anthracnose disease on giant philodendron. This study provides information for further investigation into the epidemiology and management of this disease. Moreover, further investigations should be carried out in other philodendron growing areas of Thailand in order to specifically search for this pathogen.

Taxonomic Novelties and New Records of Amanita Subgenus Amanitina from Thailand.

The Amanita subgenus Amanitina contains six sections, and the species diversity of this subgenus has still not been explored in Thailand. Twenty samples collected in 2019 and 2020, which had the morphological characteristics of the Amanita subgen. Amanitina, were observed in this study. Both the microscopical characteristics and multi-gene phylogenetic analyses of the ITS, nrLSU, RPB2, TEF1-α, and TUB gene regions revealed that the 20 samples represented nine species and dispersed into four sections. Remarkably, three taxa were different from any other currently known species. Here, we describe them as new to science, namely A. albifragilis, A. claristriata, and A. fulvisquamea. Moreover, we also recognized six interesting taxa, including four records that were new to Thailand, viz. A. cacaina, A. citrinoannulata, A. griseofarinosa, and A. neoovoidea, as well as two previously recorded species, A. caojizong and A. oberwinkleriana. Moreover, we provide the first RPB2 and TEF1-α gene sequences for A. cacaina. Detailed descriptions, illustrations as line drawings, and comparisons with related taxa are provided.

Appendage-Bearing Sordariomycetes from Dipterocarpus alatus Leaf Litter in Thailand.

Leaf litter is an essential functional aspect of forest ecosystems, acting as a source of organic matter, a protective layer in forest soils, and a nurturing habitat for micro- and macro-organisms. Through their successional occurrence, litter-inhabiting microfungi play a key role in litter decomposition and nutrient recycling. Despite their importance in terrestrial ecosystems and their abundance and diversity, information on the taxonomy, diversity, and host preference of these decomposer taxa is scarce. This study aims to clarify the taxonomy and phylogeny of four saprobic fungal taxa inhabiting Dipterocarpus alatus leaf litter. Leaf litter samples were collected from Doi Inthanon National Park in Chiang Mai, northern Thailand. Fungal isolates were characterized based on morphology and molecular phylogeny of the nuclear ribosomal DNA (ITS, LSU) and protein-coding genes (tub2, tef1-α, rpb2). One novel saprobic species, Ciliochorella dipterocarpi, and two new host records, Pestalotiopsis dracontomelon and Robillarda australiana, are introduced. The newly described taxa are compared with similar species, and comprehensive descriptions, micrographs, and phylogenetic trees are provided.

OMICS and Other Advanced Technologies in Mycological Applications.

Fungi play many roles in different ecosystems. The precise identification of fungi is important in different aspects. Historically, they were identified based on morphological characteristics, but technological advancements such as polymerase chain reaction (PCR) and DNA sequencing now enable more accurate identification and taxonomy, and higher-level classifications. However, some species, referred to as "dark taxa", lack distinct physical features that makes their identification challenging. High-throughput sequencing and metagenomics of environmental samples provide a solution to identifying new lineages of fungi. This paper discusses different approaches to taxonomy, including PCR amplification and sequencing of rDNA, multi-loci phylogenetic analyses, and the importance of various omics (large-scale molecular) techniques for understanding fungal applications. The use of proteomics, transcriptomics, metatranscriptomics, metabolomics, and interactomics provides a comprehensive understanding of fungi. These advanced technologies are critical for expanding the knowledge of the Kingdom of Fungi, including its impact on food safety and security, edible mushrooms foodomics, fungal secondary metabolites, mycotoxin-producing fungi, and biomedical and therapeutic applications, including antifungal drugs and drug resistance, and fungal omics data for novel drug development. The paper also highlights the importance of exploring fungi from extreme environments and understudied areas to identify novel lineages in the fungal dark taxa.

Diversity, morphology, and molecular phylogeny of Diatrypaceae from southern China.

During an investigation of Diatrypaceae from southern China, 10 xylariales-like taxa have been collected. Morphological and multi-gene analyses confirmed that these taxa reside in Diatrypaceae and represent eight novel taxa and two new records belonging to six genera (viz., Allocryptovalsa, Diatrype, Diatrypella, Paraeutypella, Peroneutypa, and Vasilyeva gen. nov.). Vasilyeva gen. nov. was proposed to accommodate Vasilyeva cinnamomi sp. nov. Among the other collections, seven new species were introduced (viz., Diatrype camelliae-japonicae sp. nov., Diatrype rubi sp. nov., Diatrypella guiyangensis sp. nov., Diatrypella fatsiae-japonicae sp. nov., Paraeutypella subguizhouensis sp. nov., Peroneutypa hainanensis sp. nov., and Peroneutypa qianensis sp. nov.), while two were reported as new records from China (Allocryptovalsa rabenhorstii and Diatrype enteroxantha). For Diatrypaceae, the traditional taxonomic approach based on morphology may not be applicable.

Survey of Edible Amanita in Northern Thailand and Their Nutritional Value, Total Phenolic Content, Antioxidant and α-Glucosidase Inhibitory Activities.

Edible wild mushrooms are extremely popular among consumers and are highly valued for their potential economic benefits in northern Thailand. In this present study, a total of 19 specimens of edible Amanita were collected during investigations of wild edible mushrooms in northern Thailand during the period from 2019 to 2022. Their morphological characteristics and the phylogenetic analyses of the internal transcribed spacer (ITS) and partial large subunit (nrLSU) of ribosomal RNA, RNA polymerase II second-largest subunit (rpb2) and partial translation elongation factor 1-alpha (tef-1) indicated that the collected specimens belonged to A. hemibapha, A. pseudoprinceps, A. rubromarginata, A. subhemibapha, and Amanita section Caesareae. This is the first report of A. pseudoprinceps and A. subhemibapha from Thailand. Full descriptions, illustrations and a phylogenetic placement of all specimens collected in this study are provided. Subsequently, the nutritional composition and total phenolic content, as well as the antioxidant and α-glucosidase inhibitory activities, of each species were investigated. The results indicate that the protein contents in both A. pseudoprinceps and A. subhemibapha were significantly higher than in A. hemibapha and A. rubromarginata. The highest total phenolic content was found in the extract of A. pseudoprinceps. In terms of antioxidant properties, the extract of A. pseudoprinceps also exhibited significantly high antioxidant activity by 2,2-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid (ABTS), 2,2-diphenyl-1-picrylhydrazyl (DPPH) and ferric reducing antioxidant power (FRAP) assays. However, the extract of A. rubromarginata had the lowest total phenolic content and level of antioxidant activity. Additionally, α-glucosidase inhibitory activity varied for different Amanita species and the highest level of α-glucosidase inhibitory activity was found in the extract of A. pseudoprinceps. This study provides valuable information on the nutrient content, phenolic content and the antioxidant and α-glucosidase inhibitory potential of edible Amanita species found in northern Thailand.

Isolation of Phosphate-Solubilizing Microorganisms and the Formulation of Biofertilizer for Sustainable Processing of Phosphate Rock.

As phosphorus (P) bioavailability is limited in arable lands, chemical fertilizers are being used by farmers to increase crop production. Phosphate-solubilizing microorganisms (PSMs) increase the bioavailability of sparingly soluble inorganic and organic soil phosphorus. Therefore, the current study was an effort to evaluate the phosphate-solubilizing efficiency of PSMs using tricalcium phosphate (TCP) and Eppawala rock phosphate (ERP). The efficiency of phosphate solubilization by a series of identified isolates was compared using TCP (5 g L-1) and ERP (5 g L-1) as a P source in Pikovskava's broth. Twelve microbial isolates that showed a higher efficiency in phosphate solubilization were selected for the production of the biofertilizer. The isolate F10 in ERP broth was characterized by the highest significant level of available phosphorus (896.98 ± 10.41) mg L-1, followed by F5 (Aspergillus sp.) in TCP broth 991.43 ± 1.37 mg L-1. A pot trial was carried out by using Capsicum annuum L. as the test plant in two soil conditions: sterilized soil and non-sterilized soil with six treatments and four replicates. The significantly highest plant height, leaf length, and width were shown by chili plants treated with the formulated biofertilizer. Therefore, the application of native PSMs appeared to be an efficient method of solubilizing sparingly soluble P compounds into plant-available forms.

Three new yeast species from flowers of Camellia sinensis var. assamica collected in Northern Thailand and their tannin tolerance characterization.

Our recent research study focused on Miang fermentation revealed that tannin-tolerant yeasts and bacteria play vital roles in the Miang production process. A high proportion of yeast species are associated with plants, insects, or both, and nectar is one of the unexplored sources of yeast biodiversity. Therefore, this study aimed to isolate and identify yeasts of tea flowers of Camellia sinensis var. assamica and to investigate their tannin tolerance, which is a property essential to Miang production processes. A total of 82 yeasts were recovered from a total of 53 flower samples in Northern Thailand. It was found that two and eight yeast strains were distinct from all other known species within the genera Metschnikowia and Wickerhamiella, respectively. These yeast strains were described as three new species, namely, Metschnikowia lannaensis, Wickerhamiella camelliae, and W. thailandensis. The identification of these species was based on phenotypic (morphological, biochemical, and physiological characteristics) and phylogenetic analyses of a combination of the internal transcribed spacer (ITS) regions and the D1/D2 domains of the large subunit (LSU) ribosomal RNA gene. The yeast diversity in tea flowers acquired from Chiang Mai, Lampang, and Nan provinces had a positive correlation with those acquired from Phayao, Chiang Rai, and Phrae, respectively. Wickerhamiella azyma, Candida leandrae, and W. thailandensis were the species uniquely found in tea flowers collected from Nan and Phrae, Chiang Mai, and Lampang provinces, respectively. Some of the tannin-tolerant and/or tannase-producing yeasts were associated with yeasts in the commercial Miang process and those found during Miang production, i.e., C. tropicalis, Hyphopichia burtonii, Meyerozyma caribbica, Pichia manshurica, C. orthopsilosis, Cyberlindnera fabianii, Hanseniaspora uvarum, and Wickerhamomyces anomalus. In conclusion, these studies suggest that floral nectar could support the formation of yeast communities that are beneficial for Miang production.

Identification and Characterization of Fusarium Species Causing Watermelon Fruit Rot in Northern Thailand.

Fruit rot caused by phytopathogenic fungi is one of the major diseases affecting watermelons (Citrullus lanatus) around the world, which can result in unmarketable fruits and significant economic losses. Fruit rot was observed on watermelons throughout the postharvest storage periods in Phayao Province, northern Thailand in 2022. For the present study, a total of ten fungal isolates were isolated from the rot lesions of watermelons. All obtained fungal isolates were then characterized in terms of their pathogenicity. The results indicated that only four fungal isolates caused rot disease with similar symptoms during the postharvest storage period. Based on their morphological characteristics, these four fungal isolates were identified as belonging to the genus Fusarium. Using multi-gene phylogenetic analyses with a combination of the translation elongation factor 1-alpha (tef-1), calmodulin (cam), and RNA polymerase second largest subunit (rpb2) genes, the fungal isolates were subsequently identified as Fusarium compactum and F. paranaense. Taken together, the results of this study indicate that F. compactum and F. paranaense cause fruit rot disease in watermelons. To the best of our knowledge, this is the first study to report F. compactum and F. paranaense as novel pathogens of watermelon fruit rot both in Thailand and elsewhere in the world.

Termite Mushrooms (Termitomyces), a Potential Source of Nutrients and Bioactive Compounds Exhibiting Human Health Benefits: A Review.

Termite mushrooms have been classified to the genus Termitomyces, family Lyophyllaceae, order Agaricales. These mushrooms form a mutualistic association with termites in the subfamily Macrotermitinae. In fact, all Termitomyces species are edible and have unique food value attributed to their texture, flavour, nutrient content, and beneficial mediational properties. Additionally, Termitomyces have been recognized for their ethno-medicinal importance in various indigenous communities throughout Asia and Africa. Recent studies on Termitomyces have indicated that their bioactive compounds have the potential to fight against certain human diseases such as cancer, hyperlipidaemia, gastroduodenal diseases, and Alzheimer's. Furthermore, they possess various beneficial antioxidant and antimicrobial properties. Moreover, different enzymes produced from Termitomyces have the potential to be used in a range of industrial applications. Herein, we present a brief review of the current findings through an overview of recently published literature involving taxonomic updates, diversity, distribution, ethno-medicinal uses, nutritional value, medicinal importance, and industrial implementations of Termitomyces, as well as its socioeconomic importance.

Naturally Occurring Functional Ingredient from Filamentous Thermophilic Cyanobacterium Leptolyngbya sp. KC45: Phytochemical Characterizations and Their Multiple Bioactivities.

Cyanobacteria are rich in phytochemicals, which have beneficial impacts on the prevention of many diseases. This study aimed to comprehensively characterize phytochemicals and evaluate multifunctional bioactivities in the ethanolic extract of the cyanobacterium Leptolyngbya sp. KC45. Results found that the extract mainly contained chlorophylls, carotenoids, phenolics, and flavonoids. Through LC-ESI-QTOF-MS/MS analysis, 38 phenolic compounds with promising bioactivities were discovered, and a higher diversity of flavonoids was found among the phenolic compounds identified. The extract effectively absorbed the harmful UV rays and showed high antioxidant activity on DPPH, ABTS, and PFRAP. The extract yielded high-efficiency inhibitory effects on enzymes (tyrosinase, collagenase, ACE, and α-glucosidase) related to diseases. Interestingly, the extract showed a strong cytotoxic effect on cancer cells (skin A375, lung A549, and colon Caco-2), but had a much smaller effect on normal cells, indicating a satisfactory level of safety for the extract. More importantly, the combination of the DNA ladder assay and the TUNEL assay proved the appearance of DNA fragmentation in cancer cells after a 48 h treatment with the extract, confirming the apoptosis mechanisms. Our findings suggest that cyanobacterium extract could be potentially used as a functional ingredient for various industrial applications in foods, cosmetics, pharmaceuticals, and nutraceuticals.

Mechanical, Physical, and Chemical Properties of Mycelium-Based Composites Produced from Various Lignocellulosic Residues and Fungal Species.

Mycelium-based composites (MBCs) are characterized as biodegradable materials derived from fungal species. These composites can be employed across a range of industrial applications that involve the manufacturing of packaging materials as well as the manufacturing of buildings, furniture, and various other household items. However, different fungal species and substrates can directly affect the functional properties of MBCs, which ultimately vary their potential to be used in many applications. In this study, the mechanical, physical, and chemical properties of MBCs made from four different fungal species (Ganoderma fornicatum, Ganoderma williamsianum, Lentinus sajor-caju, and Schizophyllum commune) combined with three different types of lignocellulosic residues (sawdust, corn husk, and rice straw) were investigated. The results indicate that differences in both the type of lignocellulosic residues and the fungal species could affect the properties of the obtained MBCs. It was found that the MBCs obtained from sawdust had the highest degree of density. Moreover, MBCs obtained from S. commune with all three types of lignocellulosic residues exhibited the highest shrinkage value. The greatest degree of water absorption was observed in the MBCs obtained from rice straw, followed by those obtained from corn husk and sawdust. Additionally, the thermal degradation ability of the MBCs was observed to be within a range of 200 to 325 °C, which was in accordance with the thermal degradation ability of each type of lignocellulosic residue. The greatest degrees of compressive, flexural, impact, and tensile strength were observed in the MBCs of G. williamsianum and L. sajor-caju. The results indicate that the MBCs made from corn husk, combined with each fungal species, exhibited the highest values of flexural, impact, and tensile strength. Subsequently, an analysis of the chemical properties indicated that the pH value, nitrogen content, and organic matter content of the obtained MBCs were within the following ranges: 4.67−6.12, 1.05−1.37%, and 70.40−86.28%, respectively. The highest degree of electrical conductivity was observed in MBCs obtained from rice straw. Most of the physical and mechanical properties of the obtained MBCs were similar to those of polyimide and polystyrene foam. Therefore, these composites could be used to further develop relevant strategies that may allow manufacturers to effectively replace polyimide and polystyrene foams in the future.